• Welcome to the ElgrandOC forum.

    You will find that the majority of the forum is locked, but do not worry. You can unlock more content by registering to the forum completely free. Sign up is automatic, does not require email confirmation and is instant. Feel free to browse through the sections to see what topics have been covered before you register.
    You can register for an account by CLICKING HERE

    Once you have registered, you will unlock more of the forum content. You will not unlock all of the content until you have reached 10 posts. This is to give you an opportunity to chat to existing members and help to integrate you into the forum community.
    We are a friendly and helpful community and there is a wealth of infomation contained within the forum. Please feel free to register, introduce yourself and get to know your fellow members.

    Feel free to look at the Frequently Asked Questions section, the Meets/Events section and the Competition Section without having to register.
    We look forward to getting to know you and help you with any questions or problemd you have with your Elgrand.

"Tractor" diary. Elgrand from Siberia. E50.

Looking nice mate
 
Love a bit of chrome looking at the old grill that's pretty smart too
 
The long-awaited vacation) decided to clean the backup rotation regulator of the injection pump. Causes: when shifting gears from N to D, the car may stall, jumps in engine speed. In general, when everything has been checked and done, but the problems have not gone away, then you need to clean the regulator. It’s easier for someone to buy a used fuel pump, but we have the cost of a fuel pump = average monthly salary) and so: here it is installed. To disassemble it, you need to cut off the contacts. In general, everything needs to be disassembled and cleaned with a cleaner. It is necessary to pay attention to the magnet, the coil and the core, a lot of metal chips settle there. After, I did the assembly. I will write about the installation and configuration of the regulator later.
 
Can't beat free stuff.
 
Hello! Need advice. There are very distant plans to repaint the tractor (the Raptor composition will be used as a basis with the addition of color). Are there any online sites where I can choose a car and try to change the color, add different color stripes??
 
He ain't painting it the bottom one Fool!!



I do like that raised look on the E50, aggressive and purposeful. We'll on your one at least as it always looks like it's been on an adventure.
 
Зенит или Зоркий? Почему не ФЭД или Смена?)))))
 
Hello from Mordor. Ordered sills and rear arches of 1.5mm metal. Just ordered a complete set of all silent blocks on the front and rear suspension. In general, the global renovation is getting closer ..
 
1. Assessed the extent of the repair. Rear right arch .. It looks like it survived the beaver attack) tried on a new arch. Manually adjusted to the original.
 
Good to see your giving it some fresh steel wish I could of got hold of new arches when I did mine
 
Hello from Mordor. Tonight began a detailed examination of the rear right arch. The results are terrible. Need more metal...
 
Is the second skin on the chassis rail ok mine rotted through first cut it out and welded it the second layer cleaned up well
 
Back
Top