• Welcome to the ElgrandOC forum.

    You will find that the majority of the forum is locked, but do not worry. You can unlock more content by registering to the forum completely free. Sign up is automatic, does not require email confirmation and is instant. Feel free to browse through the sections to see what topics have been covered before you register.
    You can register for an account by CLICKING HERE

    Once you have registered, you will unlock more of the forum content. You will not unlock all of the content until you have reached 10 posts. This is to give you an opportunity to chat to existing members and help to integrate you into the forum community.
    We are a friendly and helpful community and there is a wealth of infomation contained within the forum. Please feel free to register, introduce yourself and get to know your fellow members.

    Feel free to look at the Frequently Asked Questions section, the Meets/Events section and the Competition Section without having to register.
    We look forward to getting to know you and help you with any questions or problemd you have with your Elgrand.

What have you done to your Elgrand today?

Fitted the change over switch for my air horns. No more vacant switch slots now, will need a panel from an XL if I want to fit any more switches.

B4ED9EDA-23B0-4DCE-BDA7-9A45C36B268F_1_105_c.jpeg
 
Washed and put a coat of Bilt Hamber DSW on (yes even the roof) as it's show time next Sunday and the weather is not too good next week.
Now I want it to rain so I can see it bead...
And I ordered some more LEDs this time for a project on the inside....
DJI_0161.JPG
DJI_0159.JPG
DJI_0158.JPG
DJI_0157.JPG
DJI_0156.JPG
DJI_0155.JPG
DJI_0154.JPG
 
Another wee bit done to my pod, tiolet segregated and cooker drawer runners fixed, two more drawers to fit tommorow, then ready for the wet wall panels.
 

Attachments

  • 20200815_172253.jpg
    20200815_172253.jpg
    79.2 KB · Views: 18
  • 20200815_172355.jpg
    20200815_172355.jpg
    90.3 KB · Views: 18
Love your van dognero, looks great on the 350z (?) wheels and the 5 digit plate. I have a short plate to go on mine when I find one.

What model is yours?
 
2006 Rider S Autech
 
Simon58 said:
Gave her a pre show wash and polish, wash and polish 🤔. Finished off fitting the bed and front seats and carpet. Get bed upholstery next week just in time for the show. 😎👍🤞
Click to expand...
How hard were your front seats to fit , after all ??
 
Simon58 said:
Gave her a pre show wash and polish, wash and polish 🤔. Finished off fitting the bed and front seats and carpet. Get bed upholstery next week just in time for the show. 😎👍🤞
Click to expand...
Bugger forgot these .
malcolmyz85 said:
How hard were your front seats to fit , after all ??
Click to expand...
Not hard if you have access to some tools , and some mechanical knowledge. Had to remove the rear feet off the runners , because the S2 seat fixing points are 2inches longer on the runners than the S1 runners . So had to fit the feet back on 2inches forward from there original position. Used flat head hex bolts to secure the feet on , but of a faf on but just had to be patient. Also had thought of just drilling through the floor to fix the seats , but there's that many pipes and sections that you can't see the floor , so no good doing it that way. Took me couple of hrs all told for 1 seat but I was at work and ended up chatting to the boss and another instructor.
 

Attachments

  • 20200815_160648.jpg
    20200815_160648.jpg
    88.9 KB · Views: 21
  • 20200815_160657.jpg
    20200815_160657.jpg
    90.6 KB · Views: 28
  • 20200815_160710.jpg
    20200815_160710.jpg
    105.7 KB · Views: 28
  • 20200815_173646.jpg
    20200815_173646.jpg
    98.4 KB · Views: 28
  • 20200815_173658.jpg
    20200815_173658.jpg
    77.8 KB · Views: 22
Paddlindazza said:
Fitted the drivers side awning rail today, awning one side and canopy the other. East and west wings for the Elgrand mansion
Click to expand...
How did you attach the rail ? Any photos would be appreciated. 😎👍
 
Simon58 said:
Bugger forgot these .

Not hard if you have access to some tools , and some mechanical knowledge. Had to remove the rear feet off the runners , because the S2 seat fixing points are 2inches longer on the runners than the S1 runners . So had to fit the feet back on 2inches forward from there original position. Used flat head hex bolts to secure the feet on , but of a faf on but just had to be patient. Also had thought of just drilling through the floor to fix the seats , but there's that many pipes and sections that you can't see the floor , so no good doing it that way. Took me couple of hrs all told for 1 seat but I was at work and ended up chatting to the boss and another instructor.
Click to expand...
Are they the seats u have fitted ?? Looks well cool , are they standand Elgrand seats
 
Simon58 said:
How did you attach the rail ? Any photos would be appreciated. 😎👍
Click to expand...
Drilled and screwed through gutter trim into roof. Sealant in between roof/trim and rail. Didn't take any pics but these are from when I did the other side. I left gaps for roof rack but these seal quite well with awning.

 
malcolmyz85 said:
Are they the seats u have fitted ?? Looks well cool , are they standand Elgrand seats
Click to expand...
Yep , got rid of the cream leather , drivers seat knackered as usual. Black half leather seat civers I already had . Got from tojomotors also got the rear fold up seats just incase me or the next owner want to take the bed out and revert back to normal seats . After all that im toying with the idea of selling it or trading it in for something newer. Want a purple one with red or black leather interior. Also fancy a campervan. But knowing me will still have it in 5 years time .🤔😎👍
 
You must log in or register to reply here.
Back
Top