• Welcome to the ElgrandOC forum.

    You will find that the majority of the forum is locked, but do not worry. You can unlock more content by registering to the forum completely free. Sign up is automatic, does not require email confirmation and is instant. Feel free to browse through the sections to see what topics have been covered before you register.
    You can register for an account by CLICKING HERE

    Once you have registered, you will unlock more of the forum content. You will not unlock all of the content until you have reached 10 posts. This is to give you an opportunity to chat to existing members and help to integrate you into the forum community.
    We are a friendly and helpful community and there is a wealth of infomation contained within the forum. Please feel free to register, introduce yourself and get to know your fellow members.

    Feel free to look at the Frequently Asked Questions section, the Meets/Events section and the Competition Section without having to register.
    We look forward to getting to know you and help you with any questions or problemd you have with your Elgrand.

Selector lever locked in P

KK Motors said:
The gearbox was changed by another mechanic. Now when I engage drive it just revs and doesn't move, but when I slide to manual and shift up it only starts moving from 4th gear!
Click to expand...
Check out a post on here.

E51 Lost power​

 
Gtti said:
okay firstly check your brake switch this most common cause after that there's a control module part number 28540WL50A it located at left top corner of the dashboard you need remove both windscreen inner trim panel then top black panel top dash nearest too windscreen you see control module screwed down with 3 screws on left passenger side

look at item D IN LINK BELOW
Click to expand...
Very handy bit of info, just got a replacement module today, attempting to install this tonight, thanks.
 
BurnzieAU said:
Perfect, took 5mins to install and have full function back of the selector...... I had my fingers crossed if it would work, because the install went too easy :)
Click to expand...
Thanks, I ordered one and same it really was much more convenient to replace than I expected. Issue resolved for me too!
 
You must log in or register to reply here.
Back
Top