• Welcome to the ElgrandOC forum.

    You will find that the majority of the forum is locked, but do not worry. You can unlock more content by registering to the forum completely free. Sign up is automatic, does not require email confirmation and is instant. Feel free to browse through the sections to see what topics have been covered before you register.
    You can register for an account by CLICKING HERE

    Once you have registered, you will unlock more of the forum content. You will not unlock all of the content until you have reached 10 posts. This is to give you an opportunity to chat to existing members and help to integrate you into the forum community.
    We are a friendly and helpful community and there is a wealth of infomation contained within the forum. Please feel free to register, introduce yourself and get to know your fellow members.

    Feel free to look at the Frequently Asked Questions section, the Meets/Events section and the Competition Section without having to register.
    We look forward to getting to know you and help you with any questions or problemd you have with your Elgrand.

What have you done to your Elgrand today?

Not just today but since we got the car we have:
* put a new tyre on (got a flat)
* alignment and balance
* Put new tie rod ends on
* another alignment
* adjusted the parking brake
* cleaned and lubricated the curtain tracks (tailgate curtain is a little weak but the others are great now)
* tried (kind of successfully) to install a new head unit - new wiring adapters on the way to fix poor wiring
* lubricated the power mirrors and bonnet latch
* fixed minor rust around the front door seals, right sliding door seal and tailgate seal
* polished out all the lights
* re-terminated the fog light wiring
* replaced fog light bulbs

Still on the list to do:
* adjust left headlight (pattern is wrong)
* fix park lights (one is blown, the other needs to be reterminated)
* fix rear subframe bush
* finish the head unit install
* adjust the vertical alignment of the radar unit
 
Just now I set about repairing the cracked side skirts on the rider. Had a quote from a breakers for the two bits of plastic and fell over so I'll just fix these and paint them instead seen as I have over a litre of g30 paint now as well. 😂😂🤟.
Did you know each skirt is held on with 18 bolts...
18!!! 😂😂😂🤣🤣🤣

https://minimaddaps88-blog.tumblr.com%2Fpost%2F816147221244411904
 
Got the offside rear suspension on, new springs/dampers and airbags, tried the new disc and painted calipers to check fit and just to see how it looked. While I'm posting, is there any reason the bottom damper bolt can't go in with the nut at the rear? Do Nissan fit them with the nut at the front just to make it awkward to get the bolt out as it fouls the parking brake metal tubing. 20260509_143618.jpg
 
BrianH said:
Got the offside rear suspension on, new springs/dampers and airbags, tried the new disc and painted calipers to check fit and just to see how it looked. While I'm posting, is there any reason the bottom damper bolt can't go in with the nut at the rear? Do Nissan fit them with the nut at the front just to make it awkward to get the bolt out as it fouls the parking brake metal tubing. View attachment 120559
Click to expand...
Not sure but did you have a weird bolt in yours with no head on it and a little tang on it to stop it from spinning when the nuts tightened up? That's what I found on ours when I did shocks. 🤷🤷.
 
BrianH said:
Got the offside rear suspension on, new springs/dampers and airbags, tried the new disc and painted calipers to check fit and just to see how it looked. While I'm posting, is there any reason the bottom damper bolt can't go in with the nut at the rear? Do Nissan fit them with the nut at the front just to make it awkward to get the bolt out as it fouls the parking brake metal tubing. View attachment 120559
Click to expand...
Looking good mate and I put my bottom bolt the other way as I see no reason not too
 
Yes that's the one, but I've put mine back on the other way around so that putting the bolt back in doesn't foul on the parking brake tubing, also I would think it normal to put the bolt head in the direction of travel, that way if the nut ever came off the bolt should stay in due to the excellent acceleration of the Elgrand ;)
 
minimaddaps said:
Not sure but did you have a weird bolt in yours with no head on it and a little tang on it to stop it from spinning when the nuts tightened up? That's what I found on ours when I did shocks. 🤷🤷.
Click to expand...
That’s the correct and original bolt type ( not cheap to replace either)
 
Just to say, after a few hours on charge, the car is back to starting happily. So it does indeed seem like if the key is left in the car with the ignition off, it prevents it from going into sleep mode. I assume that if the key was in the faraday pouch it might have prevented this, but it wasn't. Don't want to test that theory really as I only have one working key and would rather not lock it inside the car!
 
BrianH said:
Got the offside rear suspension on, new springs/dampers and airbags, tried the new disc and painted calipers to check fit and just to see how it looked. While I'm posting, is there any reason the bottom damper bolt can't go in with the nut at the rear? Do Nissan fit them with the nut at the front just to make it awkward to get the bolt out as it fouls the parking brake metal tubing. View attachment 120559
Click to expand...
Are those the upgraded discs from JDM? Thinking of fitting those (and some HEL brake lines) when mine next need doing.
 
You must log in or register to reply here.
Back
Top