• Welcome to the ElgrandOC forum.

    You will find that the majority of the forum is locked, but do not worry. You can unlock more content by registering to the forum completely free. Sign up is automatic, does not require email confirmation and is instant. Feel free to browse through the sections to see what topics have been covered before you register.
    You can register for an account by CLICKING HERE

    Once you have registered, you will unlock more of the forum content. You will not unlock all of the content until you have reached 10 posts. This is to give you an opportunity to chat to existing members and help to integrate you into the forum community.
    We are a friendly and helpful community and there is a wealth of infomation contained within the forum. Please feel free to register, introduce yourself and get to know your fellow members.

    Feel free to look at the Frequently Asked Questions section, the Meets/Events section and the Competition Section without having to register.
    We look forward to getting to know you and help you with any questions or problemd you have with your Elgrand.

What have you done to your Elgrand today?

Up&Dn said:
My apologies.

I was on a rare night out..no glasses as I'd left them at home....and I thought it was the same thread.

If you need more info I can send it.

Sorry again
Click to expand...
It's OK, my PA (@Highway Dave ) fetched me the link.. :D 👍
 
Bob Edwards said:
nothing to the Elgrand but halfway through fitting mx5 popup lights to nippers vw t4 one side almost done just a bit of fettling to do and then the other side move the battery and the profile of the mx5 light cover is a match for t4 bonnet
Click to expand...
Pop up lights on a T4??:eek: Photo's or it never happened 🤣
 
JagoGell said:
I bet! Me too, but I think they'll be hard to find.

So, er, can we see your rainbows?
Click to expand...

JagoGell said:
I bet! Me too, but I think they'll be hard to find.

So, er, can we see your rainbows?
Click to expand...
Apologies for the deafening silence - I've just been exploring how to upload photos and it's currently beyond me, even with the 'help'page :( Might be quicker if I drive to your house :laughing: I'm working on it!
 
kurly said:
Apologies for the deafening silence - I've just been exploring how to upload photos and it's currently beyond me, even with the 'help'page :( Might be quicker if I drive to your house :laughing: I'm working on it!
Click to expand...
If you buy Premium Membership you can upload photos by simple 'drag and drop' :)
 
kurly said:
Apologies for the deafening silence - I've just been exploring how to upload photos and it's currently beyond me, even with the 'help'page :( Might be quicker if I drive to your house :laughing: I'm working on it!
Click to expand...
Echoing @Bal comment about premium membership :)
 
Did the plugs this morning. Job is actually ok if the wiper panel is removed along with the Air inlet pipe. Pots 1 2 3 4 & 6 are a breeze but number 5....well most of you know. And really, it's just trying to get on that coil pack bolt. It was so annoying that I learned a Japanese cuss word, just so it understood how much it was pissing me off 😅. Don't think I'm mentally prepared enough to tackle the front cats, today.
 
I noticed the back box waving in the breeze (that's about 35mph here).

There is no flange between the centre box and back box, there's been a weld repair previously which has come apart.

So that's today's job, cut and weld a section removed from my scrap volvo pipe, which is a bigger bore, so it can create a useful sleeve.

It was going well until I dropped the l9ck for the grinder wheel, and it disappeared into another dimension 🤔
 
JagoGell said:
I noticed the back box waving in the breeze (that's about 35mph here).

There is no flange between the centre box and back box, there's been a weld repair previously which has come apart.

So that's today's job, cut and weld a section removed from my scrap volvo pipe, which is a bigger bore, so it can create a useful sleeve.

It was going well until I dropped the l9ck for the grinder wheel, and it disappeared into another dimension 🤔
Click to expand...
It will be with many of my 10mm sockets and everything else I have dropped into the engine bay 🤣
 
You must log in or register to reply here.
Back
Top