• Welcome to the ElgrandOC forum.

    You will find that the majority of the forum is locked, but do not worry. You can unlock more content by registering to the forum completely free. Sign up is automatic, does not require email confirmation and is instant. Feel free to browse through the sections to see what topics have been covered before you register.
    You can register for an account by CLICKING HERE

    Once you have registered, you will unlock more of the forum content. You will not unlock all of the content until you have reached 10 posts. This is to give you an opportunity to chat to existing members and help to integrate you into the forum community.
    We are a friendly and helpful community and there is a wealth of infomation contained within the forum. Please feel free to register, introduce yourself and get to know your fellow members.

    Feel free to look at the Frequently Asked Questions section, the Meets/Events section and the Competition Section without having to register.
    We look forward to getting to know you and help you with any questions or problemd you have with your Elgrand.

What have you done to your Elgrand today?

Hi Lacabrera, a straight swap from carpet to rubber? Can you confirm that the carpet has no semi-rigidness about it? I'm worried about a spungy floor. And do you have a link for the rubber? Last time I googled 'rubber' I blushed...
Lol, yes the floor is a bit spongey I had some Altro floor covering left over from a job and used it as an underlay. This is the rubber flooring I used. https://www.ebay.co.uk/itm/Stud-Pen...-/333909457650?_trksid=p2349624.m46890.l49286
 
Threadlocked swirl flap screws, reassembled everything and then lost a 1/4" bit adapter which I dropped down the front of the radiator.

It didn't make it to the ground and wasn't on the front undertray when I removed it. At a bit of a lost where it's gone.
Just got to hope its not lodged in or near any moving parts 😱
 
Just got to hope its not lodged in or near any moving parts 😱
It went down the front of the radiator so missed all the belts and my Elgrand is 2WD so no front driveshaft to worry about.

Editted:

Found it behind the foglight.
 
Last edited:
Made myself a Service Record booklet, which only highlights the lack of history in Japan from 28,000km to 86,000km 😳
 
managed to repair the rear door locking button, it had been pushed too hard by 1 of my offspring, & was hiding in the hole.
had to remove the rear door internal panel, then the number plate etc to get access to it, ended up the metal bracket its attached to had corroded, so resorted to a substantial cable tie to secure, all back together, working fine now, happy
 
Back
Top